Manual shaver 6 use skill.

How to use the manual shaver? Teach you six skills! While it is convenient for electric razors, many men prefer manual ones because they are clean and affordable. But many people still shave their faces when used. So, how do you use a manual shaver? Take a look at the manual shaver techniques described below.

I. composition and principle of manual shaver:

The manual shaver is generally made up of the head and the hoe. Rest with aluminum, stainless steel or copper, plastic materials, rubber, etc, by the blade of the cutting tools and plastic combined with synthetic rubber, blade usually made of stainless steel, carbon steel, in order to guarantee the razor sharp and durable, edge will be special material processing. In order to ensure the smoothness of shaving, the head of the blade usually contains a moisturizing and calming lubrication. When used, the knife head is mounted on the tool holder and the handle of the holder can be shaved.

How to use the manual shaver? Here are 6 tips to use:

1. Clean the position of whiskers.

Wash the razor and hands and wash the face (especially the area of the beard).

2. Soften the beard with warm water.

Splash some warm water on your face, which will open up your pores and soften your beard. Apply shaving foam or shaving cream to the area you want to shave. Wait 2 to 3 minutes before starting to shave.

3. Scrape from top to bottom.

The shaving procedure usually starts with the upper cheek of the left and right sides, followed by the upper lip, followed by the angular part of the face. The general rule is to start with the thinnest part of the beard, the thickest part at the end. Because shaving cream stays longer, hu gan can soften further.

4. Rinse off with warm water.

Rinse off with warm water and pat dry with dry towel. Do not rub.

5. Aftercare

The aftershave is somewhat injured, so don't rub it. Stick to the end with cold water to pat your face, then use aftershave or toner, shrink water, aftershave, and maintain the product.

Sometimes it is possible to overdo it, shave it too hard, and cause bleeding on your face, so don't panic. Should be treated calmly, put on a tourniquet immediately, also can use a small group of clean cotton or paper towel hard to hold down the wound 2 minutes. Then, dip a few drops of water into a clean sheet of paper and gently place it on the wound, then slowly remove the cotton or tissue.

6. Cleaning blade

Remember to rinse the knife and dry it in a ventilated place. In order to avoid bacteria breeding, the blade should be changed regularly. Rinse with water and soak in 75 degrees of alcohol.

3. How to choose the manual shaver correctly?

First of all, the most important thing is the razor blade, the choice of blade needs to pay attention to three points.

One is the quality of the blades, the second is the number and density of the blades, and the third is the Angle of the blade. In terms of the quality of the blade blade needs to have a large enough toughness and small resistance, as far as possible to ensure shaving smoother and durable, using artificial diamond coating blade can achieve this goal.

From the number and density, the need to achieve a good balance, the rise in the Numbers can decrease The Times of complex shave but may pull skin cause discomfort, density can reduce the force of friction, but too close and can cause the blade between easy to jam, not easy to clean. So generally speaking, the combination of the five blades can better coordinate this balance; From the perspective, good contact Angle can not only be more smooth, but also avoid damage to the skin, the flexible fit of the blade and progressive blade arrangement is the more advanced design at present.

Second, the design before and after the blade touches the skin is also crucial for good shaving.

In front of the blade in contact with skin, razor needs to be able to slight flattening blade in contact with the skin area, produce a certain tension, fibrous root give, razor more joint surface of the skin at the same time, the relaxed smooth shave beard root and not scratch the skin. This will allow you to shave thoroughly during a shave, reduce the number of times you shave, and protect your skin from too much damage. For example, under the razor, the soft protective sensor fins are made of soft, ultra-thin material, which can gently pull the skin when it gently slides over the skin, causing the root to stand up and massage the skin.

After the blade is shaved, there is a need for good lubrication protection, such as a razor with a lubricating strip. This will allow you to secrete lubricant immediately after shaving, to protect your skin, to reduce tingling and irritation, and to be more lubricated when you shave.

See the above introduction, now you know the manual shaver how to use. Don't be careless when shaving, or you'll scratch your face.