Precautions for the use of electric razor

1. If the beard is very long, the beard should be cut short with a shisser or a small scissors first, and then shaved by an electric razor. The electric shaver is not suitable to shave the long beard.

2, when shaving, if there is a stop rolling phenomenon, it should turn off the power and restart, and then continue to shave after the motor is rotated.

Maintenance of electric razor

Every time the electric shaver is finished, the battery should be taken out in order to prevent the battery from dampened leakage and cause unnecessary damage. In addition, every time you have used the electric shaver, should use small brush hair and dirt clean.

The above article is the introduction of the correct use of the electric razor and related information, hoping to help you.

Use of electric shaver

1. The power of the electric shaver should be installed, and the polarity of the battery or charger should be paid attention to, so as to avoid the reversing of the motor and cause the damage of the blade and the blade.

2, start the switch, push the electric razor's knife edge close to the face slowly, then push slowly towards the direction of the beard growth, and shave off the clean beard. If the beard is pushed along with the beard, the beard will overwhelm the beard and the beard will not be allowed to enter the mesh.